Hotline: 0755-86238834


recommended / recommended
Contact us
Tel: 0755-86238834 
  Address: 1st F, Bld 8, Nangang 2nd Industrial Area, Nanshan, Shenzhen,China 518055 
News News detail

What are the mechanical properties of zirconia ceramics

Date: 2018-07-13
Browse: 19

Zirconium oxide ceramic materials are usually made by cutting, grinding, grinding and polishing of blank materials. This process requires mechanical processing. The mechanical processing properties of zirconia ceramics include cutting, grinding, grinding and polishing

Zirconium oxide ceramic cutting, grinding, grinding and polishing

Zirconia ceramic cutting has three methods: fixed abrasive cutting, free abrasive cutting and single edge cutting. The application and development of high performance industrial ceramics is based on the three-phase composite ceramic material ZTA.

Plastic deformation of zirconia ceramics

Zirconium oxide ceramics have no plastic deformation at room temperature, and its compressive strength is large, while its tensile strength, flexural strength and impact strength are small. According to the material ratio, the theoretical strength of zirconia ceramics is very high, but its actual strength is only about 1% of the theoretical strength. Enhancement of zirconia ceramics

At present, some mature strengthening techniques include composite strengthening, porcelain crystallization, porcelain densification and prestress strengthening. The application and development of high performance structural industrial ceramics is based on the three-phase composite ceramic material ZTA.

Back to top
Ceramic technology / More
2018 - 07 - 12
First of all, the chemical method is mainly used to form the color of the film by chemical oxidation in a specific solution. However, it is necessary to conduct the reference ratio to ensure the final consistency of the color.Second, the high temperature oxidation method, the workpiece must be kept within the scope of the process, and then it must be directly soaked in a specific good molten salt
2013 - 12 - 11
Zirconia ceramics with phase transformation toughening and microcrack toughening, so has high strength and toughness, known as 'ceramic steel', its fracture toughness is the highest in all ceramic, but the highest hardness is alumina ceramic, zirconia it has the features: 1, zirconia ceramic hardness close to the natural diamond, lighter than metal, has never wear, don't change color g...
2018 - 07 - 09
Zirconia oxygen sensor is used to measure the content of oxygen in the flue gas of large supercritical boiler furnace with zirconia ceramic sensor. It is a large number of boiler oxygen content measurement equipment, simple structure, rapid response, accurate measurement and other advantages.Zirconia probe is the use of stable cubic zirconia ceramic in the above 650 ℃ environment produce oxygen io...
2018 - 07 - 03
With the development of LED display technology and the deepening of customer awareness, new customers are increasingly demanding the stability and reliability of LED display. Therefore, in order to meet the requirements, the manufacturer must design a more reliable LED display.At present, the LED display industry standard "general standard SJ/T11141 LED display, in the industry standard and t...
Friendship link:
Contact us
Shenzhen Hard Precision Ceramic Co.,Ltd 
Address:Bld 1-403, Mingliang Technology Park, Nanshan, Shenzhen, China 518054
Phone/Whatsapp/Skype/Wechat: 86 13824333832
Fast link
Leave word
  • Full name:
  • *
  • Company:
  • *
  • Address:
  • *
  • Tel:
  • *
  • Fax:
  • *
  • E-mail:
  • *
  • 邮政编码:
  • *
  • 留言主题:
  • *
  • Content:
  • *
Wechat Code
Welcome to Hard






  • 0755-86238834