Hotline: 0755-86238834


recommended / recommended
Contact us
Tel: 0755-86238834 
  Address: 1st F, Bld 8, Nangang 2nd Industrial Area, Nanshan, Shenzhen,China 518055 
News News detail

Zirconium oxide ceramics are superior to other similar products

Date: 2018-07-02
Browse: 16

Zirconium oxide ceramic ware is a kind of widely used ceramic, because of its superior performance, it has been used more and more widely in modern society, meeting the needs of daily use and special performance. Generally, zirconia ceramic parts can be ground and polished with Al203 powder or diamond drill paste of <1 char. M micron. In addition, laser processing and ultrasonic grinding and polishing methods can also be used.

Zirconium oxide ceramic is a ceramic material with alumina as the main body, used in thick film integrated circuit. Zirconia ceramic parts have good conductivity, mechanical strength and high temperature resistance. It should be noted that ultrasonic washing is required.

After sintering, some zirconia ceramic parts need to be refined. Products that can be used as artificial bone require a high surface finish, like a mirror, to increase lubricity.

As zirconia ceramic parts have higher hardness, it is necessary to use more hard grinding and polishing brick materials for precision processing. Usually used from coarse to fine abrasive grinding step by step, final surface polishing.

The advantages of zirconia ceramics over other enterprises:

1. High hardness, high toughness, high bending strength, and the density of zirconia ceramic parts is between 5.95-6.05 g/cm3. Among the four types of ceramic sphere materials commonly used to make ceramic materials (Si3N4, SiC, Al2O3, ZrO2), zirconia ceramic parts have the highest toughness, and over 8MPa·m1/2.

2. Zirconia ceramics have high abrasion resistance, low friction coefficient and wear resistance 15 times that of alumina ceramics. The friction coefficient is only 1/2 of alumina ceramics.

3. Zirconia ceramic parts have good insulation, corrosion resistance, no static electricity, high temperature resistance, excellent thermal insulation performance, and thermal expansion coefficient is close to that of steel.

4. Zirconia ceramic parts have self-lubricating properties. Zirconia ceramic parts can solve the pollution caused by lubricating media and the inconvenience of adding.

Back to top
Ceramic technology / More
2018 - 07 - 12
First of all, the chemical method is mainly used to form the color of the film by chemical oxidation in a specific solution. However, it is necessary to conduct the reference ratio to ensure the final consistency of the color.Second, the high temperature oxidation method, the workpiece must be kept within the scope of the process, and then it must be directly soaked in a specific good molten salt
2013 - 12 - 11
Zirconia ceramics with phase transformation toughening and microcrack toughening, so has high strength and toughness, known as 'ceramic steel', its fracture toughness is the highest in all ceramic, but the highest hardness is alumina ceramic, zirconia it has the features: 1, zirconia ceramic hardness close to the natural diamond, lighter than metal, has never wear, don't change color g...
2018 - 07 - 09
Zirconia oxygen sensor is used to measure the content of oxygen in the flue gas of large supercritical boiler furnace with zirconia ceramic sensor. It is a large number of boiler oxygen content measurement equipment, simple structure, rapid response, accurate measurement and other advantages.Zirconia probe is the use of stable cubic zirconia ceramic in the above 650 ℃ environment produce oxygen io...
2018 - 07 - 03
With the development of LED display technology and the deepening of customer awareness, new customers are increasingly demanding the stability and reliability of LED display. Therefore, in order to meet the requirements, the manufacturer must design a more reliable LED display.At present, the LED display industry standard "general standard SJ/T11141 LED display, in the industry standard and t...
Friendship link:
Contact us
Shenzhen Hard Precision Ceramic Co.,Ltd 
Address:Bld 1-403, Mingliang Technology Park, Nanshan, Shenzhen, China 518054
Phone/Whatsapp/Skype/Wechat: 86 13824333832
Fast link
Leave word
  • Full name:
  • *
  • Company:
  • *
  • Address:
  • *
  • Tel:
  • *
  • Fax:
  • *
  • E-mail:
  • *
  • 邮政编码:
  • *
  • 留言主题:
  • *
  • Content:
  • *
Wechat Code
Welcome to Hard






  • 0755-86238834